The following cables are intended to adapt the connections between the electrical regulator (installed on the diesel fuel injection pump) and the device used to check and adjust the in-line pump.
Technical specifications
Each intermediate lead has specifications for:
- pump side
- simulator side
Pump side
- 81.03.104 - Iveco, Volvo, Scania applications (RE24 and RE30 regulators)
Similar to Bosch 0 986 612 104 - see notes "Simulator side"

- 81.03.107 - Man application (RE30 regulator)
Similar to Bosch 0 986 612 107 - see notes "Simulator side"

- 81.03.109 - Mack application
Similar to Bosch 0 986 612 109 - see notes "Simulator side"

- 81.03.112 - Mercedes application
Similar to Bosch 0 986 612 112 - see notes "Simulator side"

- 81.03.113 - John Deere application
Similar to Bosch 0 986 612 113 - see notes "Simulator side"

- 81.03.114 - Scania application
Similar to Bosch 0 986 612 114 - see notes "Simulator side"

- 81.03.115 - Mercedes Sprinter application
Similar to Bosch 0 986 612 112 - see notes "Simulator side"

- 81.03.124 - Man application (RE33 regulator)
Similar to Bosch 0 986 612 124 - see notes "Simulator side"

.
Simulator side
The standard production can be varied according to different requirements, please specify yours at the order.
- Standard production

The standard production is a circular connector quite common in the industrial applications.
Pins are golden plated to assure the best signal electrical transmission.
- Bosch standard (on request)

To connect these test leads to Bosch simulator (0 986 610 101 test device)
Golden plated pins are not available.
- Custom requirements
Please provide your specifications to agree for the the customized production.
Comments